Bolt-On Series
Kingbolt RA FM
Finishes

Description

A sleek new body design, a simple yet effective control layout, and a Wilkinson tremolo system that stays in tune without the hassle of a locking nut! The revolutionary Railhammer Hyper Vintage bridge and Hyper Vintage neck pickups take it to another level, for the ultimate bolt-on rock guitar.

Specs

Body Korina Solidbody
Pickups Hyper Vintage Bridge, Hyper Vintage Neck
Bridge Wilkinson WVS50 IIK Tremolo
Neck Dark Roasted Maple
Scale 25 1/2"
Neck Profile Medium Oval
Fingerboard Rosewood - 12" Radius
Frets 22 - 0.110"W x 0.050"H
Truss Rod Dual Action - Headstock Access
Tuners Reverend Pin-Lock
Nut 43mm Width - Boneite
Controls Volume, Tone, Bass Contour, 3-Way
Strings 10-46
Case Two-Toned Teardrop (Available Separately)
Price $1299

Gallery

Features

Railhammer Pickups

Rails under the wound strings for tight lows. Poles under the plain strings for fat highs. This revolutionary design from Reverend founder Joe Naylor delivers exceptional clarity and punch, that will get you heard loud and clear!

Dark Roasted Maple Neck

Roasted Maple is heat treated at over 300° F to remove sugars, moisture, and impurities. This maple is lighter, more stable, and requires less seasonal adjustment. For the Kingbolt RA, we roasted the neck longer for a "deep roast" color that is rich, exotic and truly worthy of this fine instrument!

Korina Body

Korina (aka White Limba) is a medium-light weight wood, highly prized for consistency and tonal qualities. Often found in boutique and vintage instruments, all Reverends feature Korina bodies. A highly resonant wood, Korina is a key factor to producing our lively, responsive instruments that are rich in harmonics.

Bass Contour

This passive bass roll-off is great for tightening up the low end, or re-voicing the pickups. It can make a humbucker sound like a single-coil, or give a P-90 that classic twang. Variable pickup voicing at your fingertips!

Thin Finish

The paint on a Reverend is thinner than most production guitars, allowing the body to vibrate more freely, for a more resonant and lively tone. Thick finishes might look a little 'slicker', but at Reverend, tone is a top priority. Our finish is also UV cured, which means it's 100% dry from day one, unlike vintage-style nitrocellulose finishes, which can take years to fully dry.

Pin-Lock Tuners

A thumbwheel under the tuner pushes a steel pin up through the post, locking the string in place for exceptional tuning stability and super-fast string changes.

Initialed Headstock

Every Reverend is hand initialed and serial numbered on the back of the headstock by one of our highly skilled technicians who sets up, inspects, and tests every instrument.

Wilkinson WVS50 IIK Tremolo

Features include saddles that lock to the baseplate, adjustable arm swing tension, and a push-in/no freeplay arm. Combined with our boneite nut and pin-lock tuners, it stays in tune even under aggressive whammy action.

Vari-Claw Tremolo Claw

his innovative claw gives you the option of 3 springs in the middle for a firm tremolo feel, or 2 springs on the outside for a softer feel. The offset hook design lets you switch between 3 or 2 springs, with little or no cumbersome adjustment of the claw needed.

Custom Dome Knobs

Our proprietary knobs feature a lower profile which is less likely to be accidentally hit by the player's hand, and the white dot lets you easily see where your knob rotation is set.

Boneite Nut

We use "Boneite," a synthetic bone nut, that is more consistent than natural bone, on all Reverend instruments. It reduces friction, allowing the strings to slide through the nut slots smoothly, improving tuning stability.

Triple-Tree String Tree

This patent-pending string tree has an extended bar to hold down three strings at a time with just one tree, eliminating G string buzz in the nut slot.

Dual-Action Truss Rod

Our dual action rod adjusts in both directions, allowing back bow or forward bow. This assures correct adjustment range is possible regardless of string tension, extreme climate conditions, or the effects of long term aging. It’s also located at the headstock for easy access.

Six-Bolt Neck Plate

Two extra bolts increase mounting pressure of the neck by fifty percent. This makes a stronger neck connection, which improves sustain, tuning stability, and neck alignment.

10% Poly Caps

We use caps with a +-10% rating, while a typical cap is +-20%. Our caps are made to tighter specifications, so they’re more consistent. Made of polyester, they’re also longer lasting, and less affected by temperature than cheaper ceramic caps. Typically used in expensive boutique guitars.

Custom Jack Plate

Our proprietary jack plate features four mounting screws, instead of two. The extra screws prevent the plate from tearing out of the body. Made of steel for durability, the laser etched logo adds an extra touch of class!

Pure Tone Jack

All Reverends use an upgraded jack by Pure Tone Technologies. A standard jack has single contacts, but the Pure Tone jack has dual contacts for improved grip, audio signal and reliability. The most dependable guitar jack available.

Treble Bleed Circuit

All Reverend guitars have a treble bleed circuit, preserving the treble when you roll back the volume control. When you roll back a standard volume control, the tone loses treble and becomes dull sounding. Now you can turn down and still sound great!

10% Pots

We use Alpha control pots with a +-10% rating. While a typical pot is +-20%, our pots are built to tighter specifications, making them more consistent. Typically used in expensive boutique guitars, but standard issue in all Reverends.

Show More

Played By

Joe Trohman   - Fallout Boy, The Damned Things
Joe Trohman
Fallout Boy, The Damned Things